Email updates

Keep up to date with the latest news and content from Frontiers in Zoology and BioMed Central.

Open Access Research

Three-dimensional kinematic analysis of the pectoral girdle during upside-down locomotion of two-toed sloths (Choloepus didactylus, Linné 1758)

John A Nyakatura* and Martin S Fischer

Author Affiliations

Institut für Spezielle Zoologie und Evolutionsbiologie mit Phyletischem Museum, Friedrich-Schiller-Universität, Erbertstrasse 1, 07743 Jena, Germany

For all author emails, please log on.

Frontiers in Zoology 2010, 7:21  doi:10.1186/1742-9994-7-21


The electronic version of this article is the complete one and can be found online at: http://www.frontiersinzoology.com/content/7/1/21


Received:9 March 2010
Accepted:12 July 2010
Published:12 July 2010

© 2010 Nyakatura and Fischer; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Theria (marsupials and placental mammals) are characterized by a highly mobile pectoral girdle in which the scapula has been shown to be an important propulsive element during locomotion. Shoulder function and kinematics are highly conservative during locomotion within quadrupedal therian mammals. In order to gain insight into the functional morphology and evolution of the pectoral girdle of the two-toed sloth we here analyze the anatomy and the three-dimensional (3D) pattern of shoulder kinematics during quadrupedal suspensory ('upside-down') locomotion.

Methods

We use scientific rotoscoping, a new, non-invasive, markerless approach for x-ray reconstruction of moving morphology (XROMM), to quantify in vivo the 3D movements of all constituent skeletal elements of the shoulder girdle. Additionally we use histologic staining to analyze the configuration of the sterno-clavicular articulation (SCA).

Results

Despite the inverse orientation of the body towards gravity, sloths display a 3D kinematic pattern and an orientation of the scapula relative to the thorax similar to pronograde claviculate mammalian species that differs from that of aclaviculate as well as brachiating mammals. Reduction of the relative length of the scapula alters its displacing effect on limb excursions. The configuration of the SCA maximizes mobility at this joint and demonstrates a tensile loading regime between thorax and limbs.

Conclusions

The morphological characteristics of the scapula and the SCA allow maximal mobility of the forelimb to facilitate effective locomotion within a discontinuous habitat. These evolutionary changes associated with the adoption of the suspensory posture emphasized humeral influence on forelimb motion, but allowed the retention of the plesiomorphic 3D kinematic pattern.

Background

In therian mammals (i.e., marsupials and placental mammals) the shoulder girdle is mobilized when compared to monotremes and other amniotes [1]. The coracoids are reduced and the scapula became an important propulsive element in the forelimb [2-4]. It has been shown that both forelimb kinematics [5] and the relative proportions of propulsive elements are rather conservative in quadrupedal therian mammals [6] - observations that have been attributed to biomechanical constraints of limb configuration (see review in [7]).

In 1935 the functional anatomist Ruth Miller wrote "of all mammals the sloths have probably the strangest mode of progression" [8]. Due to their characteristic 'upside-down' posture and locomotion these animals represent interesting 'natural experiments' to study functional implications of the inverse body orientation with regard to the force of gravity. Unlike in 'normal', pronograde locomotion, a tensile loading regime acts within the limbs rather than a compressive one [9], and flexors are required to counteract the gravity-induced extension of the limbs [10]. Many morphological peculiarities of the limbs were stringently interpreted as adaptations to facilitate the upside-down posture and locomotion of sloths. For example, the anatomy of the main flexor muscles of the limbs (m. brachioradialis and m. biceps femoris) have largely advantageous moment arms on the joints they span to flex the forelimb against gravity-induced extension [10].

Earlier studies on sloth functional anatomy concentrated on the skeletal and muscular adaptations of the distal limbs to suspensory posture [8,10-13] or more general aspects of the overall locomotor pattern [14-16], and there is considerably less data available for the interpretation of possible functional aspects of peculiarities of the proximal limbs and their connection to the axial skeleton, i.e., the pectoral and pelvic girdles. The gravity vector has fundamental relevance for the connection between the limbs and the thorax. Extrinsic forelimb musculature acting on the pectoral girdle not only protracts and retracts the forelimb but also functions to suspend the weight of the thorax in mammals [17,18].

In claviculate mammals the clavicle is the only remaining skeletal connection of the forelimbs to the thorax [1]. Although in both extant sloth genera a clavicle is developed, it has an unusual articulation to the sternum (manubrium sterni), because the articulating faces are lacking [e.g., [19]]. The sterno-clavicular articulation (SCA) is described as either cartilaginous [19] or ligamentous [8,10]. Whatever the configuration of the SCA, a functional significance is implied, as authors point out the extraordinary mobility of the clavicle at this joint [8,10,19].

We present a precise reconstruction of the three-dimensional (3D) in vivo motion of skeletal structures of the pectoral girdle to gain insight into the function of the pectoral girdle in two-toed sloths (Xenarthra: Choloepus didactylus, Linné 1758) and the evolutionary changes of shoulder function associated with the adoption of the suspensory quadrupedal posture and locomotion. The data were obtained using 'scientific rotoscoping' (SR) [20], a markerless, non-invasive approach for x-ray reconstruction of moving morphology (XROMM) [21]. This technique combines synchronous biplane high-speed x-ray video and x-ray computed tomography scans to visualize and measure three-dimensional motions of the pectoral girdle usually hidden under integument, muscles and other tissue (Fig. 1). Thanks to this new approach we are able to report six degrees of freedom (DOF) data for all constituent skeletal elements of the pectoral girdle in sloths and test for the significance of different aspects of the movement of individual skeletal elements in 'virtual experiments'. Additionally, the SCA is examined using histochemical methods to aid functional interpretation of its configuration. Morphological and kinematic changes that are associated with the adoption of the suspensory quadrupedal locomotion during the evolution of modern sloths will be discussed. Analysis of the functional morphology of the pectoral girdle in sloths may yield insights into constraints and flexibility of the mammalian shoulder girdle to functional demands.

thumbnailFigure 1. Scientific rotoscoping [20]. The experimental setup for synchronous high-speed x-ray video recording (A) is virtually re-created within animation software (B). X-ray videos are loaded into the backplane as image sequence planes. A 3D bone model is positioned to match the x-ray shadow in both the lateral (C) and dorso-ventral (D) backplane for the entire image sequence. Six DOF (degrees of freedom, i.e., translations and rotations about anatomically defined coordinate systems - see methods) are exported for all constituent skeletal elements of the shoulder girdle.

Methods

Anatomical investigation

No sloths were sacrificed for this study. All procedures and animal care were carried out in compliance with the animal welfare regulations of the state of Thuringia, Germany (Reg.-Nr.: 02-08/04). Two frozen specimens of adult female C. didactylus from zoos in Paris, France, and Dresden, Germany were donated to us. The skin was removed and the subjects were formalin fixed. Prior to histological staining, tissue from the sterno-clavicular articulation (SCA) was prepared from one of the donated specimens by first removing all muscular connections from the clavicle and manubrium sterni and subsequently cutting through the midpoint of the clavicle and the middle of the manubrium sterni. Bone remnants were carefully removed ex situ and connective tissue from the articulation was embedded in paraffin before being sectioned with a Microm™ HM360 microtome (10 μm sections). Serial sections from medial to lateral were produced and histological properties were analyzed using differential staining methods (Hämalaun-Eosin (HE), Azan, and Masson-Goldner) on consecutive sections.

In order to rule out the possibility that we were studying morphological extremes in two animals used for the locomotion analysis, we additionally measured skeletal properties in the few available adult (fused epiphyses of long bones) C. didactylus individuals obtained from German museum collections (Museum f. Naturkunde, Berlin; Zoologisches Museum, Hamburg). We found our experimental subjects to lie mostly within one standard deviation of the anatomical variability of the small sample (Table 1).

Table 1. Comparative measurements of pectoral girdle elements.

Biplane high-speed x-ray motion analysis: experimental setup

X-ray videos of two adult C. didactylus of different weights and sex were recorded. Neither the female (10.6 kg, 87 cm body length measured from tip of nose to ischium) nor the male (6.5 kg, 78 cm) displayed any physical and behavioral peculiarities. X-rays were taken synchronously from the dorso-ventral and latero-lateral projections during steady-state locomotion (Fig. 1). Subjects were trained to move along a motor-driven 'treadpole' (4000 × 40 mm), which permitted the x-ray recording of several consecutive strides in a trial. Stride cycles were treated as independent events. Between 0.2 m/sec and 0.3 m/sec locomotion of two-toed sloths has been shown to be relatively uniform [16]. All slower and faster trials were discarded for the present study and only strides with symmetry values (i.e., the elapsed share of a given limb cycle at touch down of the contralateral limb) between 0.4 and 0.6 were analyzed for the sake of uniformity. We used the Student's t-test for independent samples (analyses carried out in SPSS™ 12.0) to test whether both individuals differed significantly in regard of gait parameters in different strides (sample size n = 14 and n = 18, respectively; Table 2). Intra-individual variability of gait parameters appeared to be so distinct that inter-individual differences carried no weight. Based on the observation of statistically insignificant differences between subjects in stride length, swing phase duration and contact phase duration, as well as scapula touch down angle projected to the parasagittal plane (i.e., the 2D angle obtained from the latero-lateral projection) and the qualitative comparison of inter- and intra-individual variability (Table 2), stride cycles from both experimental individuals were subsequently pooled. 10 steady-state stride cycles in each study subject were analyzed. All trials were time normalized to 50 points over the contact phase and swing phase, respectively, to facilitate compilation of multiple trials so that the mean and standard deviation of the kinematic curves could be determined.

Table 2. Intra-individual differences and inter-individual variability of gait parameters.

Both 40 cm diameter image intensifiers were equipped with a Visario Speedcam™ (Weinberger GmbH, Erlangen, Germany) and recorded at a resolution of 1.536 × 1.024 pixels and a speed of 300 frames per second (fps). A calibration object (20 × 12 × 12 cm) with metal beads inserted at 1 cm distances was used to calibrate the 3D space covered by both x-ray devices for subsequent analysis using 11 parameter direct linear transformation (DLT; necessary Matlab™ files available at http://www.xromm.org webcite) [21].

X-ray reconstruction of moving morphology (XROMM)

Scans of disarticulated skeletal elements were taken using a GE Lightspeed™ 16 CT scanner at the Zentralklinik, Bad Berka, Germany, at 120 kV and 150 mA. Voxel size of the scan was 0.47815 mm with a slice thickness of 0.625 mm. To reconstruct bone models raw data was surface rendered in Imaris™ 6.4 and converted into .obj file format using customized software (by H. Stark available at http://www.stark-jena.de webcite). Models were imported into Maya™ 8.0 and hierarchically connected via virtual joints to form a digital marionette [20]. In order to avoid possible harm of the valuable zoo animals from anesthesia a different skeleton was scanned and then scaled to match the size of the experimental subjects by using the scale tool in Maya™ and the calibrated x-ray references in the backplane.

Distortion of all x-ray recordings was corrected using a reference grid [see [21]]. In Maya™ virtual dorso-ventral and latero-lateral cameras were created and their relative position in virtual 3D space calibrated so that they imitated the actual x-ray sources (necessary Matlab™ and Maya™ embedded language files available at http://www.xromm.org webcite) (Fig. 1). The un-distorted x-ray image sequences from both projections were put in the backplane of the recreated x-ray cameras.

Motions of the modeled skeletal elements forming the digital marionette are reported relative to hierarchically higher ordered elements (Table 3). Right handed anatomical coordinate systems were implemented at the center of rotation of each element (Fig. 2). Translations were set to zero at the instant of touch down.

Table 3. Anatomical coordinate systems used for the kinematic analysis.

thumbnailFigure 2. Anatomical coordinate systems and zero-positions of rotations are used to quantify three-dimensional kinematics of the pectoral girdle. The anatomical coordinate systems were placed in the center of rotation (c.o.r.) of the proximally adjacent joint (in case of 1st thoracic vertebra into the center of the vertebral body; in case of scapula we approximated the instantaneous c.o.r. at the vertebral border of the scapula at the extension of the spina scapulae). X-axes (red) were set to represent the long axis of elements. Z-axes (blue) were oriented to represent the most distinct motion of the bone of interest. Y-axes (green) were orthogonal to the other two axes. For zero-points of rotations the anatomical axes were aligned according to the global coordinate system (unnatural pose). Motions of hierarchically higher elements have displacing effect for all lower ranked elements, i.e., motions of humerus are reported relative to scapula, scapular and clavicular motion relative to 1st thoracic vertebra, 1st thoracic vertebra motion relative to global reference.

During SR the digital marionette was then positioned to match the x-ray shadow of both projections for every fifths frame. After a trial had been completed the three rotations representing the movement of a bone relative to the higher ordered skeletal element were exported into Microsoft™ Excel.

In SR, accuracy and repeatability depends on many factors, including the quality of calibration, the visibility of skeletal structures on the x-ray references, the temporal resolution of reference x-ray videos, and on the effort of the investigator. Due to the unequal shape and thickness of the structures studied, there is not one value that can represent the accuracy of all measurements. General accuracy for optimal conditions was measured by comparing the known opening of a vernier caliper (150 mm) to the measured opening following the approach used in this study. We determined an opening of 150.704 mm; i.e., a deviation of less then one millimeter. To assess repeatability we determined the scapular lift off position of a single trial on ten consecutive days of data analysis and found only small deviations (mean ± s.d.): lift off frame 708.3 ± 0.95 (i.e., s.d. is less than 1 frame or 1/300 sec); trans × -0.43 cm (± 0.13); trans y -0.83 cm (± 0.12); trans z 0.17 cm (± 0.12); rot × -18° (± 0.76); rot y -18° (± 0.24); rot z 38° (± 0.16). Due to these deviations we report all kinematic data rounded to the closest tenth of a cm and degree, respectively.

Quantification of displacing effects of individual elements

One of the merits of the XROMM approach to kinematic analysis is that it allows 'virtual experiments' with the animated 3D reconstruction. Here, we quantify the displacing effects of individual elements of a joint chain by turning off its movements either by 'muting' all translations and rotations or by 'muting' only specific rotations. With XROMM it is possible, for example, to turn off abduction and adduction of a bone relative to its defined anatomical coordinate system. The displacing effect of the motion of an element can then be assessed by comparing the displacement of normal movements at the most distal point of the joint chain to the displacement of the most distal point in the joint chain obtained in the 'virtual experiment', with aspects of the motion turned off. In this study we assess the displacing effects of aspects of scapular and humeral motion on the displacement of the elbow. The displacement of the elbow is obtained relative to the first thoracic vertebra. We subsequently turned off total scapular motion (all translations and rotations), total humeral motion, scapular rotation along its long axis, scapular abduction/adduction, and humeral abduction/adduction from the scapular plane. In each of these experiments motion was turned off in the moment of touch down; i.e., initial position of the elbow is the same in each case but displacement is altered during the course of the 'virtual' contact phase and subsequent swing phase. Three dimensional trajectories of the elbow are reported and total deviations among the 'virtual experiments' can thus be compared.

Results

Skeletal anatomy of pectoral girdle

The thorax of C. didactylus has 23 to 24 ribs, of which 12 are connected to the sternum [22]. In cranial direction the thorax tapers considerably. The SCA allows virtually all degrees of freedom, when the clavicle is stripped of attaching muscles [10]. The internally curved clavicle articulates to the scapula in a small notch at the widely flared acromial process. Fused to the coracoid process, the acromion forms an arch that is extended cranially beyond the humeral head. It provides prominent attachment sites for the m. trapezius, m. subclavius, and m. deltoideus. When compared to forelimb intralimb proportions reported for large dataset of mammalian species [6], the relative length of the scapula of C. didactylus (expressed as percentage of sum of scapula, upper arm and lower arm length) is very short [21% instead of ca. 30%; cf. 6]. The scapula is thin and the spina scapulae does not reach the vertebral border. The caudal border is characterized by a broad attachment site for the well developed m. teres major. The gleno-humeral joint is marked by a shallow fossa glenoidalis and round humeral head. There is a considerable incongruity between both articulating surfaces.

Histologic properties of the SCA

Serial cross sections and differential staining of the SCA from proximal to distal revealed a homogenous fibrous composition of the structure (Fig 3). No elastic or reticular fibers are evident, as they would have stained orange-red in Azan staining and light green in Masson-Goldner staining. Also, there is no cartilage or fibrocartilage within the SCA, as it would have stained blue in the HE staining. Additionally, there is little intercellular substance (violet in HE staining) apart from the intercellular collagen. Thus the SCA can be identified as dense connective tissue containing irregular arranged collagen fiber bundles. There was no synovial cavity found.

thumbnailFigure 3. Histological properties of the sterno-clavicular articulation (SCA). A: Overview of representative cross section, B: illustration of manubrium sterni (ventral aspect), clavicle, scapula, and position of the representative cross section through the SCA (dotted line), C-E enlarged insets of A stained differently on subsequent sections. Panels A and C stained with Azan, D stained with HE, E stained following Masson-Goldner protocol. The articulation comprises solely irregular fibrous connective tissue. Neither elastic fibers nor cartilage or muscle tissue are evident. The collagen fibers do not form regular parallel bundles. No synovial cavity is present.

Thorax movements

During quadrupedal suspensory locomotion in sloths, the thorax experiences side to side displacement over the course of a step cycle (translation along z-axis in Fig 4A). In combination with the tapered shape of the rib cage, this movement leads to the approximate alignment of the thoracic wall with the parasagittal plane at the moment of forelimb lift off at the same body side. Rotation about the y-axis indicates that during contact of a forelimb the long axis of the 1st thoracic vertebra first points towards the contralateral side and then rotates to face the ipsilateral body side at lift off. We documented almost no rotation about the long axis and a relatively constant pitch towards the support in the 1st thoracic vertebra (Table 4).

Table 4. Six DOF kinematic data for the elements of the pectoral girdle during steady-state locomotion of C. didactylus.

thumbnailFigure 4. Mean 3D kinematics of the pectoral girdle over a step cycle (n = 20). A: 1st thoracic vertebra; B: scapular center of rotation/scapula; C: shoulder joint/humerus; D: sterno-clavicular joint/clavicle. Translations shown left, rotations right. Translations and rotations about x-axes are red, translations about y-axes are green, translations and rotations about z-axes are blue. The anatomical significance of these motions is detailed in Table 3 and Fig. 2.

Three dimensional movements of the scapula

Movements of the shoulder blade follow the morphology of the thorax and are confined by the clavicle (Fig. 5). The center of rotation of scapular protraction and retraction is positioned at the vertebral border of the scapula. We documented slight translations of the center of rotation in the second half of the contact phase (Fig. 4B), the most prominent being a caudal translation along the thoracic wall with a maximum of about 0.8 cm on average (Table 4). At the same time the center of rotation is translated laterally and ventrally.

thumbnailFigure 5. Representative frames of instants of (A) touch down, (B) mid contact, (C) lift off, and (D) mid swing. X-ray image with bone model posed to match the x-ray shadow is shown for the dorso-ventral projection and the latero-lateral projection.

At initial contact the scapula is positioned cranially and dorsally (Fig. 5). It is almost maximally protracted (rotated about the z-axis 72° from vertical), rotated inward to about 26° and mean net abduction is -14° (i.e. the shoulder joint is positioned more medial than the scapular center of rotation). After about 30% of the contact phase, scapular retraction, i.e., rotation about the z-axis (Fig. 4B), sets in. During retraction the scapula glides around the rounded thorax and the degree of scapular rotation about the long axis decreases to a minimum of about 18° shortly before lift off. The negative abduction, on the other hand, remains relatively constant. At maximum retraction the long axis of the scapula is orientated 39° from vertical (36° maximum amplitude; Table 4). The laterally displaced tapered thorax almost positions the scapula into the parasagittal plane, but it is still rotated inwards (about its long axis) at lift off. The ventro-caudal movement of the glenoid during the contact phase describes a semi-circle, with its distance to the sternum kept relatively constant by the clavicle. At lift-off the glenoid fossa faces ventral. Scapula protraction starts shortly before lift-off and full protraction is reached shortly before the limb touches down again.

Movements in the gleno-humeral joint

Only minimal translations of less than two millimeters are observed in the gleno-humeral joint (Fig. 4C) - minute motions which are only slightly above our estimated analytical grade of repeatability. During the initial third of the contact phase, when there is little scapula movement, the upper arm is retracted exclusively via flexion in the gleno-humeral joint (rotation about z-axis Fig. 4C, Fig. 5). Flexion starts immediately before touch down from maximal extension (approx. -70° from long axis of scapula), and full flexion (approx. -125° from long axis of scapula) is reached shortly after mid contact. In the second half of the contact phase the gleno-humeral joint extends slowly and continues this extension for most of the swing phase until it reaches full extension again. During steady-state locomotion in C. didactylus, humeral abduction from the scapular plane is moderate (maximal amplitude during contact approx. 13°).

Movements of the clavicle

The sternal end of the clavicle translates up to 0.6 cm relative to the manubrium sterni (Table 2, Fig. 4D). These movements are facilitated by the connective tissue making up the sterno-clavicular articulation (SCA) (Fig. 3). At touch down, the clavicle is rotated approximately 84° about its long axis (rotation about x-axis in Fig. 4D) and protracted by about 22° (indicated by a negative value for rotation about y-axis). The acromio-clavicular joint is positioned more dorsal than the manubrium sterni (44° rotation about z-axis). During limb retraction rotation about the long axis decreases to about 20° and the clavicle is both retracted and depressed so that at lift off, the acromio-clavicular joint and the SCA are at the same height. It is noteworthy that caudal displacement of the acromio-clavicular joint is achieved not only by rotation about the y-axis, but also by the pronounced rotation about the long axis of the curved clavicle.

3D displacement of the elbow: effects of scapular and humeral motion

The displacement of the elbow is governed by both scapular and humeral motions, i.e., trajectories of elbow displacement differ markedly if scapular or humeral motion is 'muted' (Fig. 6A, D). Normal locomotion has a medio-lateral amplitude of displacement of the elbow of 2.5 cm relative to the 1st thoracic vertebra (Table 5, Fig. 6B). The amplitude of medio-lateral displacement is just 1.7 cm if all humeral translations and rotations in the gleno-humeral joint are turned off. The amplitude remains at 2.5 if scapular motion is turned off completely in the 'virtual experiment', however both the maximum and the minimum increase. The 'muting' of scapular abduction/adduction has almost no effect on elbow displacement as these movements are rather minor (Table 5; Fig. 6D). The turning off of scapular as well as humeral rotation about their respective long axes both increases the amplitude of medio-lateral displacement of the elbow to 3.1 cm. This means that the rotation about the long axis in the scapula and humeral abduction/adduction partly offset each other and observed medio-lateral displacement of the elbow is smaller (Fig. 6E). In sum, total abduction of the arm is determined by the combination of the scapula's position relative to the rounded rib cage (i.e., scapular rotation about the long axis and scapular protraction and retraction) and humeral abduction from the scapular plane.

Table 5. Mean maximal and minimal 3D displacements of the elbow relative to the 1st thoracic vertebra during normal locomotion and 'virtual experiments' to assess the displacing effect of the motion of the scapula and humerus.

thumbnailFigure 6. 3D displacement of the right elbow and the influence of scapular and humeral motion. A, D: 3D trajectories of the elbow shown for normal locomotion (blue), without humeral motion (orange), without scapular motion (red), without scapular abduction/adduction (yellow - almost completely covered by blue trajectory, i.e. almost identical), without scapular rotation along its long axis (green), and without humeral abduction from the scapular plane (purple). Swing phases are shown in gray. B, E: depict a 2D projection of the trajectory onto the transversal plane as seen from behind. C, F: 2-D projection of the trajectory onto the frontal plane as seen from above.

Cranio-caudal displacement of the elbow relative to first thoracic vertebra is predominantly achieved by humeral retraction in the gleno-humeral joint (a decrease in cranio-caudal displacement from 14.4 cm to 9.0 cm if humeral motion is turned off). Scapular retraction also contributes to the amplitude of elbow displacement as the amplitude decreases to 10.6 cm if scapula motion is 'muted' virtually in the 3D animated reconstruction (Fig. 6C). Scapular abduction/adduction and scapular rotation about its long axis has only little influence on the cranio-caudal amplitude of the 3D trajectory of displacement of the elbow (Table 5). Turning off humeral abduction/adduction slightly increases the cranio-caudal amplitude of elbow displacement.

Dorso-ventral displacement of the elbow is largely determined by humeral retraction (Table 5) with only little influence of the scapula. However, as evident in the graph (Fig. 6B) only the combination of both movements effectively displaces the elbow in dorso-ventral direction. Scapular abduction/adduction as well as rotation about its long axis again has very limited influence on the displacement of the elbow. The amplitude of dorso-ventral displacement is slightly reduced if humeral abduction/adduction is 'muted' in our 'virtual experiment' (from 10.3 cm to 9.4 cm).

Discussion

Significance of scapular motion

Humeral retraction has been shown to be responsible for over 70% of stride length in two-toed sloths [16]. Accordingly, most of the cranio-caudal displacement of the elbow observed in this study is generated by retraction of the humerus in the gleno-humeral joint. However, despite emphasized influence of humeral motion to the displacement of the hand, the overall pattern of forelimb movement is very similar to pronograde mammals: forelimb movement in sloths takes place at the most proximal pivot possible through the fixing of distal limb joints and retraction of the scapula as the most proximal element [16].

Scapula movement has been demonstrated via x-ray motion analysis to be an important aspect of forelimb kinematics during quadrupedalism in therian mammals [3,5,7,23,24]. The six DOF of scapular motion quantified here correspond to previous qualitative descriptions of three dimensional scapular movement in claviculate arboreal and terrestrial pronograde therian mammals (Table 6), but differ from the 3D data quantified in walking cats and the qualitative description of shoulder movements in brachiating spider monkeys [25,26]. Whereas in the aclaviculate cat there is an effective rotation about the scapular long axis of less than 2° [25], rotation about the long axis of the scapula during the contact phase of sloths has an approximate 8° amplitude (Table 4). The observation of movements that are largely restricted to the parasagittal plane in aclaviculate mammals is also in line with results from an analysis of rats with excised clavicles [23]. But the scapula, as in the cat, remains slightly abducted throughout the stride cycle in the sloth and has only a small amplitude during the contact phase (less than 1°; Table 4). Motions of the shoulder blade during quadrupedal suspensory locomotion of the sloth are also in stark contrast to the motions described for brachiating spider monkeys [26]. Spider monkeys maintain the scapula in a distinct dorsal orientation and the fossa glenoidalis faces cranially throughout the contact of the limb [26]. In similar fashion as in the claviculate pronograde species investigated [27,28], a relatively round thorax permits the scapula in the two-toed sloth to effectively slide dorsally during forelimb protraction from it's almost parasagittal orientation at lift off. This is accomplished via a combination of protraction, long-axis rotation and abduction/adduction. The more dorsal orientation of the scapula at touch down inevitably results in a more laterally facing fossa glenoidalis. The orientation of the scapula at touch down has an abducting effect on the whole forelimb. This indicates that, despite the adoption of obligatory quadrupedal suspensory locomotion, the basic kinematics of the scapula remained practically unchanged. The only striking differences are that scapular retraction sets in later in the contact phase and the initial period is marked by humeral retraction alone in sloths.

Table 6. Published data on scapular movements in mammals.

Overall mobility of the shoulder in mammals results always from a combination of mobility in the gleno-humeral joint and mobility of the pectoral girdle, which is determined by the shape of thorax, relative position of the scapula, and configuration of the clavicle [29]. However, mobility may not be confused with in vivo movement during linear locomotion, which should only represent a fracture of overall mobility.

When thorax width is compared to the dataset of different primate taxa analyzed by Kagaya et al. [30], the sloth has a smaller width (log thoracic width 1,63 mm; log body mass 0.93 kg; cf. [30]). The small diameter and rounded shape of the thorax of sloths emphasizes the 3D excursions of the comparably small scapula during forelimb protraction. Based on x-ray motion analysis, abduction generated from scapular movement seems to be emphasized in the investigated small quadrupedal primates that likely resemble the ancestral anatomical condition regarding the shape of the thorax and the position of the scapula [27]. Nevertheless, overall great mobility of the pectoral girdle as well as great mobility in the gleno-humeral joint, probably used in non-locomotor behavior, has been shown for a large dataset of primates [29,31]. The combination of a small scapula and a rounded, small-diameter thorax of sloths represents a solution to the functional demand of extensive forelimb mobility in the arboreal context. Additionally, configuration of the shoulder joint may permit extensive medio-lateral excursions of the limb by abduction of the humerus from the scapular plane as present in most Anthropoidea during locomotion [32]. Although limb abduction during quadrupedal suspensory locomotion of sloths is small, considering the morphological and kinematic data presented here we suggest that in sloths both modes are present (i.e., abduction via scapular movements and via humeral abduction from the scapular plane). Forelimb abduction in early contact phase is accomplished by a combination of an inward rotation of the scapula along its long axis with a simultaneous cranial displacement of the gleno-humeral joint by protraction of scapula. At this time the humerus remains approximately in the scapular plane. During the later contact phase outward rotation of the scapula along its long axis adducts the elbow. This adduction is offset by humeral abduction from the scapular plane, which displaces the elbow lateral (please compare green and purple trajectories in Fig. 6). The resulting trajectory is has a small medio-lateral amplitude. Interestingly, the combination of a small scapula and a rounded thorax is also present in Loridae [33,34], i.e., in other deliberate arboreal species unable to jump and with the need for increased forelimb mobility, especially for bridging, due to the discontinuous nature of their arboreal substrates.

In terrestrial quadruped therian mammals the scapula usually dominates forelimb propulsion and, especially in cursorial species, limb movement is restricted more or less to the parasagittal plane, with the scapula orientated lateral to the thoracic wall [7]. A relatively short scapula on the one hand decreases its effect in displacing distal elements of the limb in cranio-caudal direction, but on the other hand facilitates more pronounced 3D motions along the thoracic wall (e.g., from the lateral, retracted orientation at lift off to the more dorsal, protracted position at touch down). The relatively short scapula thus facilitates displacements of the limb in the medio-lateral direction through 3D displacements of the limb provoked by marked 3D motions relative to the thorax.

In this context it is important to note that the scapula, as a newly propulsive skeletal element added proximally to the forelimb in therian mammals, has an independent developmental program from the serially homologous elements of the fore- and hindlimbs (stylopod, zeugopod, and autopod) [6,35]. Variation of overall configuration and relative proportions of the serially homologous elements in the fore- and hindlimbs might be constrained by shared developmental programs [6], but - thanks to its individual developmental program - morphology of the scapula can probably evolve more freely according to demands that act specifically on the forelimbs. Accordingly, the scapula has been found to be the most variable element in both fore- and hindlimbs [6].

Clavicular motion

The clavicle guides all scapular movements along the thoracic wall [23]. With the distance between sternum and acromion kept relatively constant by the clavicle, the trajectory of the gleno-humeral joint of the sloth describes an arch during the contact phase of a stride cycle. The same phenomenon has been described qualitatively for other claviculate therian mammals (rat [23]; opossum [28]; small quadrupedal primates [27]). Voisin argued that the internal curvature of the clavicle of gibbons (Hylobates) and spider monkeys (Ateles) facilitates this bone's function as a crank during arm flexion and helps the glenoid cavity of the scapula to effectively rotate cranially [36]. The author further proposes that internal curvature of the clavicle may be linked to suspensory postures in these primates [36]. The strong internal curvature of the clavicle in sloths supports this notion.

In pronograde mammals the clavicle is thought to function as a 'spoke' and a 'strut' [23] and thus to transmit compressive forces between the limb and the trunk. The causal theory of histogenesis put forward by Pauwels [37] predicts that connective tissue differentiates according to its loading regime. Under compressive loads fibrocartilage differentiates within tendons and ligaments [38]. The absence of fibrocartilage in the SCA in two-toed sloths demonstrates that not only does tensile loading act on the distal limbs [9], but that tension is also transferred to the thorax (Fig. 4). Collagen fibers are differentiated in the SCA of C. didactylus in the same way as Pauwels [37] predicts for a tensile loading regime. It is intriguing to hypothesize that ossification remains incomplete at the sternal end of the clavicle (a bone that is part of the dermal skeleton) during ontogeny because of the lack of a specific stimulus (here compressive load) to differentiate an articulating face towards the manubrium sterni. A SCA composed of irregular dense fibrous connective tissue not only provides passive stability against translations and rotations [39] but complies with the added demand for increased pectoral girdle mobility in a discontinuous habitat. The absence of elastic fibers negates the possibility of elastic energy storage, although the sternal end of the clavicle translates as far as 0.8 cm cranial from its lift off position. In armadillos and the tamandua the clavicle does not articulate directly with the manubrium sterni either, and the SCA is made up of fibrous connective tissue here too [40,41]. However, it is not known whether fibrocartilage tissue differentiates as an adaptation to compressive load in these species. A comparative study in Xenarthra would yield further insights into the evolution of this interesting trait.

Summary and conclusion

The adoption of deliberate, non-agile locomotion within a discontinuous habitat made 3D limb excursions necessary, e.g., to facilitate bridging of gaps between branches or to reach for food. Sloths accomplish increased forelimb mobility through a combination of three morphological specializations, whereas the overall 3D kinematic pattern of the pectoral girdle remains remarkably unchanged, when compared to pronograde quadruped therians with developed clavicles [23,27,28]. Morphological specializations at the pectoral girdle for 3D limb excursions are i) a relatively short scapula in combination with a round, small diameter thorax, ii) maximized mobility at the SCA, and iii) an internally curved clavicle that allows effective cranial displacement of the shoulder.

Results of this study somewhat contradict Miller's [8] notion that sloths may have the strangest mode of progression amongst mammals. In the two-toed sloth morphological specializations facilitate pronounced forelimb mobility necessary in the discontinuous 3D habitat. But, increased forelimb mobility through morphological specialization at the same time allowed the retention of the plesiomorphic kinematic pattern.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

Both authors conceived of the study, designed the experiments, dissected the cadavers, interpreted the data, contributed to, and approved the final manuscript. JAN took care of and trained the animals, visited the museum collections, conducted all experiments, reconstructed bone models from CT scans, performed XROMM analysis, and drafted the manuscript.

Acknowledgements

The authors acknowledge that this study would not have been possible without the hugely informative XROMM course held by the developers EL Brainerd, SM Gatesy and others at Brown University, RI, USA in August 2009. We thank R. Petersohn for technical assistance and the curators of the museums for access to their collections. Dirk Arnold assisted the preparation of the specimens. CT scans were generously provided by Alexander Petrovitch. Heiko Stark developed helpful software. Sabine Moritz and Alexander Stössel were the authors of insightful critique of the manuscript. Lucy Cathrow thoroughly edited the language of the final draft. The manuscript profited from the helpful comments of five anonymous referees. Supported by the German Science Foundation (DFG Fi 410/11-1 to MSF).

References

  1. Eaton TH jr: Modifications of the shoulder girdle related to reach and stride in mammals.

    J Morph 1944, 75:167-171. Publisher Full Text OpenURL

  2. Kuznetsov AN: Comparative functional analysis of the fore- and hindlimbs in mammals.

    Zool J Moscow 1985, 64:1862-1867.

    (in Russian)

    OpenURL

  3. Fischer MS: Crouched posture and high fulcrum, a principle in the locomotion of small mammals: the example of the rock hyrax (Procavia capensis) (Mammalia: Hyracoidea).

    J Hum Evol 1994, 26:501-524. Publisher Full Text OpenURL

  4. Gasc JP: Comparative aspects of gait, scaling and mechanics in mammals.

    Comp Biochem Physiol A 2001, 131:121-133. Publisher Full Text OpenURL

  5. Fischer MS, Schilling N, Schmidt M, Haarhaus D, Witte H: Basic limb kinematics of small therian mammals.

    J Exp Biol 2002, 205:1315-1338. PubMed Abstract | Publisher Full Text OpenURL

  6. Schmidt M, Fischer MS: Morphological integration in mammalian limb proportions: dissociation between function and development.

    Evolution 2009, 63:749-766. PubMed Abstract | Publisher Full Text OpenURL

  7. Fischer MS, Blickhan R: The tri-segmented limb of therian mammals: kinematics, dynamics, and self-stabilization - a review.

    J Exp Zool 2006, 305A:935-952. Publisher Full Text OpenURL

  8. Miller RA: Functional adaptations in the forelimb of the sloths.

    J Mammal 1935, 16:38-51. Publisher Full Text OpenURL

  9. Patel BA, Carlson KJ: Apparent density patterns in subchondral bone of the sloth and anteater forelimb.

    Biol Lett 2008, 4:486-489. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  10. Mendel FC: Adaptations for suspensory behavior in the limbs of two-toed sloths. In The Evolution and Ecology of Armadillos, Sloths, and Vermilinguas. Edited by Montgomery GG. Washington: Smithonian Institution Press; 1985:151-162. OpenURL

  11. Mendel FC: The wrist joint of two-toed sloths and its relevance to brachiating adaptations in the Hominoidea.

    J Morph 1979, 162:413-424. Publisher Full Text OpenURL

  12. Mendel FC: The hand of two-toed sloths (Choloepus): its anatomy and potential uses relative to size of support.

    J Morph 1981, 169:1-19. Publisher Full Text OpenURL

  13. Mendel FC: Foot of two-toed sloths: its anatomy and potential uses relative to size of support.

    J Morph 1981, 170:357-372. Publisher Full Text OpenURL

  14. Mendel FC: Use of hands and feet of two-toed sloths (Choloepus hoffmanni) during climbing and terrestrial locomotion.

    J Mammal 1981, 62:413-421. Publisher Full Text OpenURL

  15. Mendel FC: Use of hands and feet of three-toed sloths (Bradypus variegatus) during climbing and terrestrial locomotion.

    J Mammal 1985, 66:359-366. Publisher Full Text OpenURL

  16. Nyakatura JA, Petrovitch A, Fischer MS: Limb kinematics during locomotion in the two-toed sloth (Choloepus didactylus, Xenarthra) and its implications for the evolution of the sloth locomotor apparatus.

    Zoology, in press. PubMed Abstract | Publisher Full Text OpenURL

  17. Davis DD: The shoulder architecture of bears and other carnivores.

    Fieldiana Zoology 1949, 81:285-305. OpenURL

  18. Carrier DR, Deban SM, Fischbein T: Locomotor function of the pectoral girdle 'muscular sling' in trotting dogs.

    J Exp Biol 2006, 209:2224-2237. PubMed Abstract | Publisher Full Text OpenURL

  19. Lucae JCG: The muscles and the skeleton of the black lemur and sloth (Lemur macaco and Choloepus didactylus).

    Frankfurt a. M.: Mahlau und Waldschmidt Verlag, Senckenbergische Naturforschende Gesellschaft 1882.

    (in German)

    OpenURL

  20. Gatesy SM, Baier DB, Jenkins FA, Dial KP: Scientific rotoscoping: a morphology-based method of 3D-motion analysis and visualization.

    J Exp Zool 2010, 313A:280-298. OpenURL

  21. Brainerd EL, Baier DB, Gatesy SM, Hedrick TL, Metzger KA, Crisco JJ: X-ray reconstruction of moving morphology (XROMM): Precision, Accuracy and Applications in Comparative Biomechanics research.

    J Exp Zool 2010, 313A:262-279. OpenURL

  22. Flower WH: On the mutual affinities of the animals composing the order Edentata.

    Proc Zool Soc 1882, 50:358-367. OpenURL

  23. Jenkins FA: The movement of the shoulder in claviculate and aclaviculate mammals.

    J Morph 1974, 144:71-84. PubMed Abstract | Publisher Full Text OpenURL

  24. Whitehead PF, Larson SG: Shoulder motion during quadrupedal walking in Cercopithecus aethiops: integration of cineradiographic and electromyographic data.

    J Hum Evol 1994, 26:525-544. Publisher Full Text OpenURL

  25. Boczek-Funke A, Kuhtz-Buschbeck JP, Illert M: Kinematic analysis of the cat shoulder girdle during treadmill locomotion: an x-ray study.

    Europ J Neuroscience 1996, 8:261-272. Publisher Full Text OpenURL

  26. Jenkins FA, Dombrowski PJ, Gordon EP: Analysis of the shoulder in brachiating spider monkeys.

    Am J Phys Anthropol 1978, 48:65-76. PubMed Abstract | Publisher Full Text OpenURL

  27. Schmidt M, Krause C: Scapula movements and their contribution to three-dimensional forelimb excursions in quadruped primates. In Primate Locomotion: Linking Field and Laboratory Research. Edited by D'Aout K, Vereecke EE. New York: Springer; in press. OpenURL

  28. Jenkins FA, Weijs WA: The functional anatomy of the shoulder in the Virginia Opossum (Didelphis virginiana).

    J Zool (Lond) 1979, 188:379-410. Publisher Full Text OpenURL

  29. Chan LK: The range of passive arm circumduction in primates: do hominins really have more mobile shoulders?

    Am J Phys Anthropol 2008, 136:265-277. PubMed Abstract | Publisher Full Text OpenURL

  30. Kagaya M, Ogihara N: Morphological study of the anthropoid thoracic cage: scaling of thoracic width and analysis of rib curvature.

    Primates 2008, 49:89-99. PubMed Abstract | Publisher Full Text OpenURL

  31. Chan LK: Glenohumeral mobility in primates.

    Folia Primatol 2007, 78:1-18. PubMed Abstract | Publisher Full Text OpenURL

  32. Schmidt M, Schilling N: Fiber type distribution in the shoulder muscles of the tree shrew, the cotton-top tamarin, and the squirrel monkey related to shoulder movements and forelimb loading.

    J Hum Evol 2007, 52:401-419. PubMed Abstract | Publisher Full Text OpenURL

  33. Strauss WL, Wislocki GB: On certain similarities between sloths and slow lemurs.

    Bull Mus Comp Zool Harvard College 1932, 74:45-56. OpenURL

  34. Schmidt M: Forelimb proportions and kinematics: are small primates different from other small mammals?

    J Exp Biol 2008, 211:3775-3789. PubMed Abstract | Publisher Full Text OpenURL

  35. Huang R, Zhi Q, Patel K, Wilting J, Christ B: Dual origin and segmental organization of the avian scapula.

    Development 2000, 127:3789-3794. PubMed Abstract | Publisher Full Text OpenURL

  36. Voisin JL: Clavicle, a neglected bone: morphology and relation to arm movements and shoulder architecture in primates.

    Anat Rec 2006, 288A:944-953. Publisher Full Text OpenURL

  37. Pauwels F: A new theory for the influence of mechanical stimuli on the differentiation of supporting tissue.

    Anat and Embryol 1960, 121:478-515.

    (in German)

    Publisher Full Text OpenURL

  38. Benjamin M, Ralphs JR: Fibrocartilage in tendons and ligaments - an adaptation to compressive load.

    J Anat 1998, 193:481-494. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  39. Ralphs JR, Benjamin M: The joint capsule: structure, composition, aging and disease.

    J Anat 1994, 184:503-509. PubMed Abstract | PubMed Central Full Text OpenURL

  40. Miles SS: The shoulder anatomy of the armadillo.

    J Mammal 1941, 22:157-169. Publisher Full Text OpenURL

  41. Taylor BK: The anatomy of the forelimb in the anteater (Tamandua) and its functional implications.

    J Morph 1978, 157:347-368. Publisher Full Text OpenURL

  42. Apfelbach R, Grzimek B: . In Grzimek's encyclopedia of mammals. Leipzig: Brockhaus; 1997.

    (in German)

    OpenURL

  43. Schmidt M, Voges D, Fischer MS: Shoulder movements during quadrupedal locomotion in arboreal primates.

    Z Morph Anthrop 2002, 83:235-242. OpenURL

  44. Schilling N, Fischer MS: Kinematic analysis of treadmill locomotion of tree shrews, Tupaia glis (Scandentia: Tupaiidae).

    Z Säugetierkunde 1999, 64:129-153. OpenURL

  45. Rocha-Barbosa O, Renous S, Gasc JP: Comparison of the fore and hind limbs kinematics in the symmetrical and asymmetrical gaits of a caviomorph rodent, the domestic guinea pig, Cavia porcellus (Linné, 1758) (Rodentia, Caviidae).

    Annales Sciences naturelles, Zoologie, Paris 1996, 17:149-165. OpenURL

  46. Schmidt M: Quadrupedal locomotion in squirrel monkeys (Cebidae: Saimiri sciureus) - a cineradiographic study on limb kinematics and related substrate reaction forces.

    Am J Phys Anthropol 2005, 128:359-370. PubMed Abstract | Publisher Full Text OpenURL

  47. Schmidt M, Fischer MS: Cineradiographic study of forelimb movements during quadrupedal walking in the Brown Lemur (Eulemur fulvus, Primates: Lemuridae).

    Am J Phys Anthropol 2000, 111:245-262. PubMed Abstract | Publisher Full Text OpenURL

  48. Miller S, van der Meché FGA: Movements of the forelimbs of the cat during stepping on a treadmill.

    Brain Research 1975, 91:255-169. PubMed Abstract | Publisher Full Text OpenURL